T100

SO₂ Analyzer - Model T100

Sulfur Compounds

	Contact us
	Training
	Sales Contacts
	Service Contacts
	Terms & Conditions

Model T100 with NumaView™ Software

UV Fluorescence Sulfur Dioxide Analyzer

T100 Product Sheet

Downloads

Title	File Size
T100 Manual	8386KB
T100 Specifications	1277KB
T Series Brochure	1030KB

Description

The Model T100 uses the proven UV fluorescence principle, coupled with a state of the art user interface to provide easy, accurate, and dependable measurements of low level SO₂.

Exceptional stability is achieved with the use of an optical shutter to compensate for PMT drift and a reference detector to correct for changes in UV lamp intensity. A hydrocarbon ‘kicker’ and advanced optical design combine to prevent inaccuracies due to interferents.

All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/O, and built-in data acquisition capability. All instrument set up, control and access to stored data and diagnostic information is available through the front panel using NumaView™ Software, or via RS232, Ethernet, or USB com ports, either locally or by remote connection using the included NumaView™ Remote PC Software. NumaView™ Remote PC Software allows for a remote connection with virtual interface and data downloading capability to analyzers operating NumaView™ Software.

The Model T100 comes with NumaView ™ Software. NumaView™ Remote PC Software allows for a remote connection with virtual interface and data downloading capability to analyzers operating NumaView ™ Software.

Features

Ranges: 0-50 ppb to 0-20 ppm, user selectable
Selectable ranges, with dual range capability
Large, vivid, and durable color graphics display with touch screen interface
Ethernet, RS-232, and (optional) USB com ports
Front panel USB connections for peripheral devices and firmware upgrades
8 analog inputs (optional)
Adaptive signal filtering optimizes response time
Temperature & pressure compensation
Internal zero & span check (optional)
Comprehensive internal data logging with programmable averaging periods
Ability to log virtually any operating parameter
Two-year warranty

Specifications

Ranges	Min: 0 - 50 ppb full scale Max: 0 - 20,000 ppb full scale (selectable, dual-range supported)
Measurement Units	ppb, ppm, μg/m3, mg/m3 (selectable)
Zero Noise	< 0.2 ppb (RMS)
Span Noise	< 0.5% of reading (RMS) above 50 ppb
Lower Detectable Limit	0.4 ppb
Zero Drift	< 0.5 ppb/24 hours
Span Drift	< 0.5% of full scale/24 hours
Lag Time	20 seconds
Rise/Fall Time	< 100 seconds to 95%
Linearity	1% of full scale
Precision	0.5% of reading above 50 ppb
Sample Flow Rate	650 cc/min ±10%
Power Requirements	100V-120V, 220V-240V, 50/60 Hz
Analog Output Ranges	10V, 5V, 1V, 0.1V (selectable)
Recorder Offset	±10%
Included I/O	1 x Ethernet: 10/100Base-T 2 x RS232 (300-115,200 baud) 2 x USB device ports 8 x opto-isolated digital outputs 6 x opto-isolated digital inputs 4 x analog outputs
Optional I/O	1 x USB com port 1 x RS485 8 x analog inputs (0-10V, 12-bit) 4 x digital alarm outputs Multidrop RS232 3 x 4 - 20mA current outputs
Operating Temperature Range	5 - 40ºC (with US EPA Approval)
Dimensions (HxWxD)	7” x 17” x 23.5” (178 x 432 x 597 mm)
Weight	35.7 lbs (16.2 kg)
Certifications* Specifications are subject to change without notice. All specifications are based on constant conditions.	US EPA: EQSA-0495-100 EU: EN14212 TÜV Rheinland QAL1 Certified: EN15267 MCerts: Sira MC0500067/07 CNEMC: 质(认)字 No. 2015-028 Report

Applications

Ambient Air Monitoring

CEMS – Stack Air Monitoring

Maintenance

The following table provides a list of items that need regular maintenance to ensure your product remains in good working condition.

ITEM	ACTION	FREQUENCY	CAL CHECK	MANUAL SECTION
¹Particulate filter	Change particle filter	Weekly	No	10.3.1
Verify test functions	Review and evaluate	Weekly	No	10.2; Appendix C in manual
Zero/span check	Evaluate offset and slope	Weekly	--	9.3, 9.6, 9.9
¹Zero/span calibration	Zero and span calibration	Every 3 months	--	9.2, 9.4, 9.5, 9.7, 9.8
¹External zero air scrubber (optional)	Exchange chemical	Every 3 months	No	10.3.3
¹Perform flow check	Check Flow	Every 6 Months	No	10.3.7
Internal IZS Permeation Tube	Replace	Annually	Yes	10.3.2
Perform pneumatic leak check	Verify Leak Tight	Annually or after repairs involving pneumatics	Yes	10.3.6
²Pump diaphragm	Replace	Annually	Yes	Refer to diaphragm kit instructions
Calibrate UV Lamp Output	Perform lAMP CAL	Prior to zero/span calibration or PMT hardware calibration	--	5.9.6 & 11.7.2.5
³PMT sensor hardware calibration	Low-level hardware calibration	On PMT/ preamp changes if 0.7 < slope or slope >1.3	Yes	11.7.2.8
¹Sample chamber optics	Clean chamber, windows and filters	As necessary	Yes	11.7.2.2 & 11.7.2.3
¹Critical flow orifice & sintered filters	Replace	As necessary	Yes	10.3.4

¹ These items are required to maintain full warranty; all other items are strongly recommended.

² A pump rebuild kit is available from Teledyne API's Technical Support, including all instructions and required parts

³Replace desiccant bags each time the inspection plate for the sensor assembly is removed.

About Us

Teledyne Monitor Labs (TML) has more than 50 year’s global experience in the design and manufacture of continuous emission monitoring systems (CEMS), process monitoring, industrial sensors and instruments, ambient monitoring and software. Our services and products serve the following industries: power generation, oil/gas refining, petrochemical, cement, lime, pulp and paper, steel, chemical, and agriculture.