T102

TRS Analyzer - Model T102

Sulfur Compounds

	Contact us
	Training
	Sales Contacts
	Service Contacts
	Terms & Conditions

Model T102 with NumaView™ Software

UV Fluorescence Total Reduced Sulfur Analyzer

T102 Product Sheet

TML T-102 NEW.png

Description

The Model T102 TRS analyzer uses the proven UV fluorescence principle to measure Total Reduced Sulfur at levels commonly required for ambient air monitoring.

The Model T102 uses a high temperature external converter set at 850°C to allow conversion of H2S, methyl mercaptan, dimethyldisulfide, and methyl-disulfide to SO2 at this temperature with efficiency greater than 98%. A switching option alternately measures TRS and SO2 while showing both readings concurrently on the front display.

All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/O, and built-in data acquisition capability. All instrument set up, control and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports, either locally or by remote connection.

The Model T102 comes with NumaView ™ Software. NumaView™ Remote PC Software allows for a remote connection with virtual interface and data downloading capability to analyzers operating NumaView ™ Software.

Downloads

Title	File Size
T102 Manual Addendum	3009KB
T102 Manual Addendum B	4395KB
T102 Specifications	1105KB
T Series Brochure	1030KB

Features

Ranges: 0-50 ppb to 0-10 ppm TRS and up to 20 ppm SO2, user selectable
Independent ranges and auto ranging
Large, vivid, and durable color graphics display with touch screen interface
Ethernet, RS-232, and (optional) USB com ports
Front panel USB connections for peripheral devices and firmware upgrades
8 analog inputs (optional)
Adaptive signal filtering optimizes response time
Temperature & pressure compensation
Auto zero system
Comprehensive internal data logging with programmable averaging periods
Ability to log virtually any operating parameter
Two-year warranty

Specifications

Ranges	TRS Min: 0 - 50 ppb full scale Max 0-10 ppm full scale SO₂ Up to 0-20 ppm full scale (selectable, independent and dual range supported)
Measurement Units	ppb, ppm, μg/m³, mg/m³ (selectable)
Zero Noise	< 0.2 ppb (RMS)
Span Noise	< 0.5% of reading (RMS) above 50 ppb
Lower Detectable Limit	0.4 ppb
Zero Drift	< 0.5 ppb/24 hours
Span Drift	< 0.5% of full scale/24 hours
Lag Time	20 seconds
Rise/Fall Time	< 20 seconds to 95%
Linearity	1% of full scale
Precision	0.5% of reading above 50 ppb
Sample Flow Rate	650 cc/min ±10%
Power Requirements	100V-120V, 220V-240V, 50/60 Hz
Analog Output Ranges	10V, 5V, 1V, 0.1V (selectable)
Recorder Offset	±10%
Included I/O	1 x Ethernet: 10/100Base-T 2 x RS232 (300-115,200 baud) 2 x USB device ports 8 x opto-isolated digital outputs 6 x opto-isolated digital inputs 4 x analog outputs
Optional I/O	1 x USB com port 1 x RS485 8 x analog inputs (0-10V, 12-bit) 4 x digital alarm outputs Multidrop RS232 3 x 4 - 20mA current outputs
Operating Temperature Range	5 - 40ºC (with US EPA Approval) 850° C (external converter)
Dimensions (HxWxD)	Analyzer 7” x 17” x 23.5” (178 x 432 x 597 mm) Converter: 7” x 17” x 23.5
Weight Specifications are subject to change without notice. All specifications are based on constant conditions.	Analyzer 37 lbs (16.8 kg) Converter: 16 lbs (7.3kg) Converter: 26 lbs (11.8kg) CE version

Applications

Maintenance

The following table provides a list of items that need regular maintenance to ensure your product remains in good working condition.

ITEM	ACTION	FREQUENCY	CAL CHECK	MANUAL SECTION
SO₂ scrubber	Replace	As required	Yes	7.3.3
H₂S à SO₂ Converter Catalyst	Replace	As required	Yes	7.3.5
¹Particulate filter	Change particle filter	Weekly	No	7.3.1
Verify test functions	Review and evaluate	Weekly	No	Appendix C in manual
Zero/span check	Evaluate offset and slope	Weekly	--	6.3, 6.6, 6.9
¹Zero/span calibration	Zero and span calibration	Every 3 months	--	6.2, 6.4, 6.5, 6.7, 6.8
¹External zero air scrubber (optional)	Exchange chemical	Every 3 months	No	7.3.4
¹Perform flow check	Check Flow	Every 6 Months	No	8.5.2
¹Critical flow orifice & sintered filters	Replace	Annually	Yes	7.3.7
Internal IZS Permeation Tube	Replace	As required	Yes	7.3.2
Perform pneumatic leak check	Verify Leak Tight	Annually or after repairs involving pneumatics	Yes	8.5.1
²Pump diaphragm	Replace	At least Every 2 years or if pres is ≥ 33.00 in-Hg-A	Yes	See instruction in diaphragm kit
PMT sensor hardware calibration	Low-level hardware calibration	On PMT/ preamp changes if 0.7 < SLOPE or SLOPE >1.3	Yes	8.6.4

¹ These items are required to maintain full warranty; all other items are strongly recommended.

² A pump rebuild kit is available from Teledyne API's Technical Support, including all instructions and required parts.

About Us

Teledyne Monitor Labs (TML) has more than 50 year’s global experience in the design and manufacture of continuous emission monitoring systems (CEMS), process monitoring, industrial sensors and instruments, ambient monitoring and software. Our services and products serve the following industries: power generation, oil/gas refining, petrochemical, cement, lime, pulp and paper, steel, chemical, and agriculture.